Opel Corsa Owners Manual: Seat adjustment, Seat folding
Seat adjustment
Danger:
Do not sit nearer than 25 cm (10
inches) from the steering wheel, to
permit safe airbag deployment.
Warning:
Never adjust seats while driving as
they could move uncontrollably.
Seat positioning
Pull handle, slide seat, release handle.
Seat backrests
Turn handwheel. Do not lean on backrest when adjusting.
Seat height
Lever pumping motion
up = higher.
down = lower.
Seat folding
Seat folding
Lift release lever and tilt backrest forwards. Lower release lever and backrest engages in lowered position.
Slide seat forwards.
To return the backrest to its original upright position: First slide seat back and it will engage in its original position. Lift the release lever, move the backrest upright, lower the release lever, backrest engages.
Folding the backrest forwards is possible only when the backrest is in an upright position.
Do not operate handwheel to adjust backrest with backrest tilted forward.
Corsa VXR
Remove seat belt from belt mount on backrest.
Pull release lever on rear of backrest and tilt backrest forwards. Release lever and backrest engages in the lowered position. Slide seat forwards.
To return the backrest to its original upright position: First slide seat back and it will engage in its original position. Pull release lever, move backrest upright, release lever, backrest engages.
Folding the backrest forwards is possible only when the backrest is in an upright position.
Do not operate handwheel to adjust backrest with backrest tilted forward.
Seat position
Warning:
Only drive with the seat correctly
adjusted.
■ Sit with buttocks as far back against
the backrest as possible. Adjust the
distance between the seat and the
pedals so that legs a ...
Heating, Seat belts
Heating
Heating
Activate heating by pressing
button
for the appropriate seat with the
ignition on.
LED in button on: relevant
front
seat heating on.
Seat heating is operat ...
See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Engine - removal and refitting
Removal
1. The engine is removed with the transmission
by lowering the two out of the engine bay. They
can then be separated on the bench.
2. Disconnect both leads from the battery.
3. Depressuri ...