Opel Corsa Owners Manual: Heated, Manual anti-dazzle, Automatic anti-dazzle, Manual windows, Power windows

Heated

Heated

Operated by pressing the
button.

Heating works with the engine running. It is switched off automatically after a short time.

Manual anti-dazzle

Manual anti-dazzle

To reduce dazzle, adjust the lever on the underside of the mirror housing.

Automatic anti-dazzle

Automatic anti-dazzle

Dazzle from following vehicles at night is automatically reduced.

Manual windows

Manual windows

The door windows can be opened or closed with the window winders.

Power windows

Warning:
Take care when operating the power windows. Risk of injury, particularly to children.

Keep a close watch on the windows when closing them.

Ensure that nothing becomes trapped in them as they move.

Power windows can be operated: ■ with ignition on, ■ within 5 minutes of switching ignition off,
■ within 5 minutes of switching ignition key to position 1.

After switching off the ignition, the window operation is disabled when the driver's door is opened, then closed and locked.

Operate the switch to open or close the window.

For vehicles with automatic feature, pull or press the switch again to stop window movement.

Safety function

If the window glass encounters resistance above the middle of the window during automatic closing, it is immediately stopped and opened again.

In the event of closing difficulties due to frost or the like, operate the switch several times to close the window in stages.

Operating windows from outside

Depending on the equipment level, the windows can be operated remotely from outside the vehicle.

Press until all windows have
opened or closed.

Overload

If the windows are repeatedly operated at short intervals, the window operation is disabled for some time.

Fault

If the windows cannot be opened or closed automatically, activate the window electronics as follows: 1. Close doors.

2. Switch on ignition.

3. Close the window completely and operate the button for a further 5 seconds.

4. Open the window completely and operate the button for a further 1 second.

5. Repeat for each window.