Opel Corsa B 1993–2000 Service and Repair Manual: Steering damper - removal and refitting
Removal
1. When fitted, the steering damper is removed as follows.
2. Remove the securing nut at the moving end of the damper (see illustration). Recover the washer.
Steering damper securing nut (arrowed)
3. Unbolt the damper from the bracket at the pinion end and remove It.
Refitting
4. When refitting, secure the pinion end of the damper first and tighten its mounting bolt to the specified torque.
5. Tighten the securing nut at the moving end of the damper to obtain a dimension A as shown (see illustration).
Steering damper securing nut setting
A = 6 mm
Steering rack bellows -
removal and refitting
Removal
1. Remove the steering gear.
2. Remove the mounting bracket and rubber
insulator from the end of the rack furthest
from the pinion.
3. On power-assisted racks, disconnect the
hydraulic p ...
Steering gear - removal and
refitting
Manual steering
Removal
1. Disconnect the battery earth lead.
2. On carburettor models only, remove the air cleaner.
3. On models with a headlamp washer
system, release the fluid reservoir and mo ...
See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Rear shock absorbers -
removal and refitting
1. Shock absorbers should be renewed in
pairs, but they should only be removed from
one side at a time. Proceed as described
under the relevant sub-heading
Hatchback and Saloon
2. Inside the vehi ...
