Opel Corsa B 1993–2000 Service and Repair Manual: Fuel tank sender unit - removal and refitting
Note: Refer to the warning note in Section 1 before proceeding.
Removal
1. Disconnect the electrical leads from the sender unit (see illustration).
Fuel gauge sender unit (screw-fit
sender unit)
2. To remove the sender unit, either engage a flat piece of steel as a lever between two of the raised tabs on the sender unit and turn it anti-clockwise to release it, or undo the retaining bolts (as applicable) (see illustration).
Fuel gauge sender unit secured by
bolts
3. Withdraw the sender unit carefully to avoid bending the float arm. Recover the sealing ring.
Refitting
4. Refit in the reverse order to removal, using a new sealing ring if necessary.
Fuel pump - testing, removal
and refitting
Note: Refer to the warning note in Section 1
before proceeding.
Testing
1. To test the fuel pump on the engine,
disconnect the outlet pipe which leads to the
carburettor, and hold a wad of rag ov ...
Fuel tank - removal and refitting
Note: Refer to the warning note in Section 1
before proceeding.
Removal
1. Disconnect the battery negative lead cap.
Remove the fuel tank filler cap.
2. A drain plug is not provided and it will ...
See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Central locking system -
general information and
component renewal
General information
1. On models so equipped, electric servo
motors cause all the passenger door locks
and the tailgate lock to follow the position of
the driver's door lock. The major components
...
